vectron international www.vectron.com v. 2006 - 11 - 10 page 1 of 5 vectron internationa l headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4530 ocxo typical applications features base stations surface mount package test equipment re flow process compatible synthesizers at - cut and sc - cut crystal options digital switching low profile compact package previous vectron model numbers oco1000 , c4500 frequency range 10 mhz ? 16 0 mhz standard frequencies 10; 12.8; 16.384; 19.2 ; 20; 26, 30.72 , 38.4, 52 mhz frequency stabilities 1 [at cut crystal ? 10 mhz to 160mhz ] parameter min typ max. units operating temp range ordering code vs. operating tem perature range - 10 0 + 10 0 ppb - 2 0 ? +70c d 1 07 (referenced to +25 c) - 250 +250 ppb - 2 0 ? +70c d 257 - 25 0 + 25 0 ppb - 40 ? +85c f 257 parameter min typ max. units condition initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / y ear vs. aging / year - 5 00 - 2 0 - 1 0 - 10 - 3 00 - 5 0 0 + 5 00 + 2 0 + 1 0 + 10 + 3 00 +50 0 ppb ppb ppb ppb ppb ppb at time of shipment, nominal efc v s 5% load 5% after 30 days of operation 60mhz; after 30 days of operation >60mhz; after 30 days of operation warm - up time 3 minutes to 100ppb of final frequency (1 hour reading) @ +25c frequency stabilities 1 [sc cut crystal ? 1 5 to 40 mhz ] parameter min typ max. units operati ng temp range ordering code vs. operating temperature range - 25 + 25 ppb - 2 0 ? +70c d25 8 (referenced to +25 c) - 50 + 50 ppb - 40 ? +85c f5 08 parameter min typ max. units condition initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging /1 year vs. aging / year (following years) - 2 00 - 5 .0 - 5.0 - 1.0 - 100 - 8 0 + 2 00 + 5 .0 +5.0 +1.0 +100 + 8 0 ppb ppb ppb ppb ppb ppb at time of shipment, nominal efc v s 5% load 5% after 30 day s of operation a fter 30 day s of operation warm - up time 3 minutes to 10ppb of final frequency (1 hour reading) @ +25c supply voltage (vs) parameter min typ max. units condition ordering code supply voltage [standard] 4.75 5 5.25 vdc sv050 supply voltage [optio n] 3.135 3.3 3.465 vdc sv033 power consumption 2 . 5 watts during warm - up 1.0 watts steady state @ +25c
vectron international www.vectron.com v. 2006 - 11 - 10 page 2 of 5 vectron internationa l headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4530 ocxo rf output parameter min typ max. units condition ordering code signal [standard] hcmos rfh load 15 pf signal level (vol) 0.5 vdc with vs=r 5.0v and 15pf load 0.3 vdc with vs=3.3v and 15pf load signal level (voh) 3.7 vdc with vs= 5.0v and 15pf load 2 . 4 vdc with vs=3.3v and 15pf load duty cycle 45 55 % @ (voh - vol)/2 signal [option] sinewave rfs load 50 output p ower +0 + 2 .5 + 5 .0 dbm 50 ohm load harmonics - 30 dbc 50 ohm load frequency tuning (efc) parameter min typ max. units condition ordering code 5 tuning range fixed ocxo; no adjust 0 tuning range 1.0 1 .75 2 .5 ppm with sc cut crystal 1 3 .0 5 .0 8 ppm with at cut crystal 1 linearity 5 % tuning slope positive control voltage range 0.0 2.0 4.0 vdc with vs=5.0vdc 0.0 1. 4 2. 8 vdc with vs=3.3vdc reference voltage output (vref) parameter min typ max. units condition reference voltage 3. 85 4.0 4. 15 vdc with vs=5.0vdc 2.7 2.8 2.9 vdc with vs=3.3vdc additional parameters parameter min typ max. units condition phase noise 3 - 75 dbc/hz 1 hz with 30.72 mhz - 1 10 dbc/hz 10 hz sc - cut - 1 35 dbc/hz 100 hz hcmos - 150 dbc/hz 1 khz - 150 dbc/hz 10 khz phase noise 3 - 75 dbc/hz 10 hz with 110 mhz at cut - 105 dbc/hz 100 hz sinewave - 130 dbc/hz 1 khz - 155 dbc/hz 10 khz - 160 dbc/hz 100 khz weight 10 g processing & packing handling & processing note absol ute maximum ratings parameter min typ max. units condition supply voltage (vs) 7.0 v with vs=5.0vdc 7.0 v with vs=3.3vdc output load 50 pf operable temperature range - 55 +85 c storage temperature range - 55 +125 c
vectron international www.vectron.com v. 2006 - 11 - 10 page 3 of 5 vectron internationa l headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4530 ocxo enclosures type a , f or hcmos output type b , for sinewave output , o nly with reduced at - stabilities available type c , for hcmos output package codes: code height ?h? code height ?h? code height ?h? a1 12.1 g185c b1 12.1 g185c c1 12.1 g270c a2 7.8 g185d b2 7.8 g185d c2 7.8 g270c pin connections pin connections pin connections 1 electronic frequency control input (efc) 1 rf output 1 electronic frequency control input (efc) 2 reference voltage output 2 n.c. 2 reference voltage output 3 supply voltage input (vs) 3 ground (case) 3 supply voltage input (vs) 4 rf output 4 n.c. 4 rf output 5 oven alarm 5 electronic frequency control input (efc) 5 ground (case) 6 i.c. intern connected 6 supply voltage vs oscillator 7 ground (case) 7 supply voltage vs heater *pin 6 must be remain unconnected.
vectron international www.vectron.com v. 2006 - 11 - 10 page 4 of 5 vectron internationa l headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4530 ocxo standard shipping method *bei w 24 mm nur untere lochreihe * by w 24 mm only lower hole line gurtoberseite tape upper side gurtunterseite tape buttom side abwickelrichtung unwinding direction lage im gurt position in tape pin 1 a x p b k production tolerance complying din iec 286 - 3 enclosure type tape width w [mm] quantity per meter quantity per reel dimension p type a 1/a2 44 37.5 175 or 2 3 0 32 recommended reflow profile profile feature pb - free assembly /sn - pb assembly profile feature pb - free assembly /sn - pb assembly average ramp - up rate (t l to tp) 3c/second max. time 25c to peak temperature 8 minutes max. preheat - temperature min ts min ) - temperature min ts max ) - time (min to max) (ts) 150c 200c 60 - 180 seconds time maintainted above - temperature (t l ) - time (t l ) 217c 60 - 150 seconds ts max to t l - ramp - up rate 3c/second max. time maintainted above - temperature (t l ) - time (t l ) 217c 60 - 150 seconds time within 5c of actual peak temperature (tp) 20 - 40 sec onds peak temperature (tp) max 260c ramp - down rate 6c/second max. note: all temperatures refer to topside of the package, measured on the package body surface.
vectron international www.vectron.com v. 2006 - 11 - 10 page 5 of 5 vectron internationa l headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4530 ocxo processing note: this fr 4 based smd ocxo is a non - hermetic construction for u se in no - clean reflow processes and is 6/6 rohs compliant. if you intend to wash this smd ocxo, please contact your sales representative to discuss the possibility. how to o rder this product: step 1 use this worksheet to forward the following informat ion to your factory representative : model stability code supply voltage code rf output code package code frequency control/ enable frequency c 4530 d107 sv050 rfh a 1 1 10mhz vs.operat. temp. range signal: tunin g range: d107: 100ppb - 20 ? +70c rfh: hcmos 0: fixed o cxo; no adjust d257: 250ppb - 20 ? +70c rfs: sinewave 1: 1.0 ppm.. 2.5 ppm (sc) f257: 250ppb - 40 ? +85c 1: 3.0 ppm.. 8.0 ppm (at) d258: 25ppb - 20 ? +7 0c f508: 50ppb - 40 ? +85c supply: enclosure: a 1: g185c sv050: 5v sv033: 3.3v a2: g185d b1: g185c b2: g185d c1: g270 d c2: g270d step 2 the fac tory representative wil l then respond with a vectron model number in the following c onfiguration: model package code dash dash number c4530 [customer specified package code] - [factory generated 4 digit number] typical p/n = c4530 a1 - 0001 notes: 1 c ontact factory for improved stabilities or additional product options. not all options and codes are available at all frequencies. 2 unless otherwise stated all values are valid after warm - up time and refer to typical conditions for supply voltage, frequ ency control voltage, load, temperature (25c) 3 phase noise degrades with increasing output frequency. 4 subject to technical modification. 5 contact factory for availability.
|
